Notizie

News blog… notizie fresche di stampa da b&m

Agosto 2021

Welcome to our family, b&m-VIBE®

23.08.2021 - Rohrbach, Germany

b&m-VIBE®, a decoupling element for absorbing and deflecting vibrations and noise, is now part of our product family. b&m-VIBE® is the perfect fastener to prevent the transmission of occurring vibrations to adjacent components. With the b&m-VIBE® b&m responds to the various challenges of the market, for damping vibrations and reducing noise emissions.

Visit our product page for more information.

A very warm welcome to our new trainees!

02.08.2021 - Rohrbach, Germany

The new trainee programmes began on the 1st August 2021. We wish our trainees a great start at b&m.

Would you also like to be part of it? Click here for more information about our wide range of traineeships.

Luglio 2021

Save the dates!

07.07.2021 - Rohrbach, Germany

We are excited to be on the road again soon to present our latest innovations live and in person. Hope to see you there!

Sustainably beautiful!

01.07.2021 - Rohrbach, Germany

Helping our nature is not only a must. It’s great. It’s wonderful. We replaced [...] the grass in front of our headquarters with 14.000 lavender plants. This will make the wild bees and other insects very happy. And us too. Can you imagine the magnificent sight and smell when this big lavender field is in full bloom?

#bandmgoesgreen

Giugno 2021

Welcome to our family, b&m-RINU® HEX

18.06.2021 - Rohrbach, Germany

b&m-RINU® HEX, a hexagonal blind rivet nut for applying threads in thin-walled components, is now part of our product family. Compared to [...] cylindrical blind rivet nuts, the b&m-RINU® HEX with its hexagon shaft offers a form fit in the intended hexagonal hole. After assembly, a higher-quality metric thread is available, which can be used for the assembly of further components.

Visit our product page for more information.

Welcome to our family, b&m-RINU®

17.06.2021 - Rohrbach, Germany

b&m-RINU® is a blind rivet nut that is now part of our product family. The b&m-RINU® technology makes it possible for [...] thin-walled components to be connected to each other and to apply a full thread regardless of the support material of the application.

Visit our product page for more information.

Maggio 2021

We proudly present our NEW production!

03.05.2021 - Rohrbach, Germany

New production hall – new possibilities! Our production moved into a new facility and now offers [...] space for many more innovative machines. Here in Ober-Ramstadt/Rohrbach we are able to produce screws with a diameter of 3-14 mm and a length of 8-100 mm, true to our motto “Made in Germany”. We are therefore perfectly equipped for your individual fastener solutions - whether big or small!

Curious? Contact us for your personal production tour

Aprile 2021

Welcome to the family b&m-REPTO® E

22.04.2021 - Rohrbach, Germany

The b&m-REPTO® E is a threaded insert for [...] expansion embedding, with the function of connecting screws with plastic components in a reliable and reproducible manner. The outer contour is characterized by a knurl and a slotted embedding area, which are optimally designed for tensile loads.

Visit our product page for more information.

Let's stay healthy together!

15.04.2021 - Rohrbach, Germany

We would like to thank all our employees for their great support over the last few weeks! To the colleagues in Germany: thank you for testing yourselves so conscientiously twice a week. We are very pleased that the rapid tests we've been providing already for 3 weeks, are taken on board so well.

Marzo 2021

Discover our b&m-REPTO® Family

26.03.2021 - Rohrbach, Germany

NOW also available in Pb-free materials.

The b&m-REPTO® family at a glance

08.03.2021 - Rohrbach, Germany

Do you already know the various applications of the b&m threaded inserts and threaded bolts? In our new advertising material you can learn more about the product family and in which industries it is used.

Febbraio 2021

Did you know how versatile the b&m-KL PLUG® is?

18.02.2021 - Rohrbach, Germany

To show the various application fields of our b&m-KL PLUG® a new animation [...] has been published.

Find out more about the benefits of using the b&m-KL PLUG® and watch the video .

Gennaio 2021

The b&m-KL PLUG® takes off

12.01.2021 - Rohrbach, Germany

Did you know how many holes or channels inside a car have to be sealed or closed? [...] Countless! The b&m-KL PLUG® can be used for many components. It has enormous benefits compared to conventional sealing solutions. Find out more and take a look at our new promotional material on the b&m-KL PLUG®.

Download it here.

Happy New Year 2021

01.01.2021 – Rohrbach, Germany

We wish you you a happy new year 2021. Stay safe and healthy.

Dicembre 2020

Merry Christmas

24.12.2020 – Rohrbach, Germany

We wish you a Merry Christmas and say THANK YOU for the great cooperation in 2020.

Raffle on Instagram

01.12.2020 – Rohrbach, Deutschland

Curious? Then follow us on Instagram and find out more about our raffle.

Novembre 2020

Have you got the hang of it?

26.11.2020 - Rohrbach, Germany

With our b&m-SHOWCASE Tower you will! Placed in your engineering, development, application laboratory [...] or prototype store, you always have all parts directly at your site. You can find important product-specific information by entering the item number in our b&m-PORT®. This ensures physical availability of the b&m brands at your site and easy access for assembly tests. In addition, the relevant data for the respective item is available online in our b&m-PORT®.

We look into the future

04.11.2020 - Rohrbach, Germany

2021 and 2022 we start with full speed ahead! IAA 2021 and EUROGUSS 2022 - We'll be there! We look forward to presenting [...] our innovations and services from the field of connection technology live again next year. Get ready!

Settembre 2020

Embedding machines for our b&m-REPTO® Family

03.09.2020 - Rohrbach, Germany

We are pleased to inform you that two new machines have recently been added to our application laboratory. These are devices [...] for embedding threaded inserts and threaded bolts in plastics by using ultrasound or heat. Therefore we can offer you the same support as for the rest of our product portfolio. With the embedding machines we have the possibility to embed threaded inserts and threaded bolts at our premises and subsequently check important parameters for you. These include pull-out forces, torque absorption and overtorques. After our tests, we are also happy to make recommendations for embedding times and, if necessary, the required embedding heat. The embedding tests can be performed on simple plastic plates made of different materials and compositions. We are also happy to perform them on your original components and find the right b&m-REPTO® for you. Are you interested?

More information about our b&m-REPTO® Family can be found here .

Agosto 2020

Thread forming | thread tapping | thread cutting

27.08.2020 – Rohrbach, Germany

The product portfolio of b&m is versatile. No matter if you are looking for thread forming, thread tapping or thread cutting screws, you will [...] find it here. But why do you need an alternative to the conventional screwing with metric screws? Direct screwing offers many advantages in contrast to machining thread production. With direct screwing in metals the fasteners generate a thread when screwed in without cutting. Due to an uninterrupted grain flow and strain hardening of the material, the principle of non-cutting forming used here produces a thread with high load capacity. The generated thread is a metric ISO thread which is compatible with standard parts. Furthermore, the threads formed in this way are free of play and self-locking. Thread forming screws can be used in all ductile, i.e. plastically deformable materials. Through the forming process of the thread no chips will be created that could interfere with further processes. In addition, you will also benefit from cost advantages through elimination of thread cutting/shaping and direct use in cast, drilled or punched holes. The time-consuming preparation of the counterpart is therefore no longer necessary.

Are you interested? Then have a look at our products on the subject Direct Screwing in Metals . Or contact us directly with your question via our contact form .

FAKUMA 2020 CANCELLED

21.08.2020 – Rohrbach, Germany

Come to our b&m-Technology Center in Rohrbach and immerse with us in the world of b&m. We will introduce you to the company baier & michels, show you the uniqueness [...] of our b&m brands and convince you of our excellent service. We will round off your visit with a direct view into our new production facility and our application laboratory. Over a cup of coffee in the cosy atmosphere of our b&m-Technology Center, we can find a suitable solution for your application problems together with you. Alternatively, we would be happy to come to you with our technical equipment and advise you on site on your questions. Would you like to explore our b&m-Technology Center or organize a b&m-TECH Day at your premises? Contact us - we look forward to meeting you!

More info you can find here .

Luglio 2020

baier & michels | b&m | BuM | BandM

20.07.2020 - Rohrbach, Germany

No matter what name you know us by, we are behind it. We are baier & michels and stand for innovative fasteners in best quality. Every single employee makes [...] us special. We are proud of what we are and attach great importance to respect, fairness, honesty, trust, acceptance, appreciation, courage to challenge, professionality and enthusiasm. Especially when dealing with our employees, a secure connection is our top priority, because only together we are strong!

b&m focuses on MADE IN GERMANY

09.07.2020 - Rohrbach, Germany

As a fastener manufacturer, especially in our own production, we rely above all on innovative development expertise and a high level of production know-how. [...] To increase our production capacity, our production will soon move to new premises. Be curious. New b&m production - Coming Soon

b&m goes electrical, b&m goes green!

07.07.2020 - Rohrbach, Germany

We are proud to present our first electric pool vehicle. For recharging we have installed our own charging stations from Webasto. Many thanks to the Webasto Group for the good cooperation.

Giugno 2020

BEE b&m

30.06.2020 - Rohrbach, Germany

Since 3 weeks we have new small and hard-working employees. 2 bee colonies are with us at our headquarter in Ober-Ramstadt. Bees are very important and [...] irreplaceable for us humans and especially for the nature. Without these small hard-working colleagues there would be no blooming nature and no delicious fruit in our gardens! Did you know that bees are very social like us humans? That' s why a single bee would not survive for long even with the very best care, becausethey need social contacts, too! These two bee colonies belong to the beekeeper Rudi Scheitler, who is taking care of them. Therefore we're not only support the preservation of our ecosystem and our nature but also the beekeepers of our region!

Be up to DATE

04.06.2020 - Rohrbach, Germany

The June issue of our newsletter is available. Register below in the Community section to receive our newsletter and stay "up to DATE" on innovations in fastening technology.

Marzo 2020

b&m Trainees on Instagram!

23.03.2020 - Rohrbach, Germany

Dear customers, dear b&m Family, The time has come, our trainees from baier & michels are now on Instagram. Follow us on Instagram. Best wishes from the b&m Trainees

Our door stays open for you

20.03.2020 - Rohrbach, Deutschland

Whatever happens, we're open and happy to help you with your fastening topics!

New company website

02.03.2020 - Our new company website is online!

We are pleased to inform you that our new website of the b&m Group is now online! After one year of development, programming and data maintenance we could finally [...] go live. I would like to thank all colleagues involved for their hard work, perseverance and great contribution. Head of Knowledge Transfer

Febbraio 2020

b&m Customer Newsletter

19. February 2020 - Rohrbach, Germany

The February issue of our newsletter is available. For regular information about innovations in fastening [...] technology, subscribe at https://lnkd.in/dcD7kRm (for English) or at https://lnkd.in/dQMUZuD (for German) #fasteners #innovation #automotive #automotiveengineering

b&m-TECH Forum in Turkey

6th of February 2020 - Turkey

Due to the high demand, we are holding several TECH Days in week 8 at our most important customers in Turkey. We are looking forward to a lively exchange and exciting discussions!

Gennaio 2020

b&m Fastener Academy 2020

The new training series of the b&m Academy, the b&m Fastener Academy, starts in February 2020

Thanks to the support of many colleagues, this year [...] we can offer a whole series of training courses on the subject of fasteners.

Over the course of 10 sessions, our specialists will give lectures on 10 different topics from the fields of technology, quality and logistics.

EUROGUSS 2020

14.-16.1.2020 - EUROGUSS 2020 in Nuremberg, Germany!

Visit us at the EUROGUSS 2020, the largest trade fair of its kind in Europe, where every two years everything [...] revolves around innovative solutions for die casting processes such as aluminum die casting, magnesium die casting or zinc die casting.

Let us show you in detail our exhibition highlights from the areas of direct screwing, closing and sealing systems and fasteners with function integration!

b&m Hungary

13.01.2020 – Alsónémedi - b&m expands to Hungary

After a long preparation, we have founded a subsidiary in Hungary and serve the Hungarian market directly on site from now on. We are delighted to welcome the new member to the b&m Group and wish our colleagues every success to this wonderful opportunity!

Novembre 2019