Direct Screwing in Metals

With direct screwing the fasteners generate a thread when screwed in without cutting.

The principle of non-cutting forming used here produces a thread with high load-bearing capacity due to the uninterrupted grain flow and strain-hardening of the material. Additional thread locking adhesives (e.g. to DIN 267-27/28) are therefore superfluous. The generated thread is a metric ISO thread which is compatible with standard parts. Furthermore, the threads formed in this way are backlash-free and self-locking. Thread forming screws can be used in all ductile, i.e. plastically deformable materials.


  • Cost advantages through elimination of thread cutting/shaping and direct use in cast, drilled or punched holes
  • Produces an uninterrupted grain flow and a thread with high load-bearing capacity by strain-hardening of the material
  • Through the forming process of the thread no chips will be created that could interfere further processes
  • The thread geometries of all our direct screwing systems have a large installation tolerance range preventing angular errors when the screw is applied
  • No play between the screw and its self-formed nut threads
  • No threadlocker is required due to the associated self-locking effect
  • Repeat screwing is possible

b&m Brands



Universally usable direct screwing system in all ductile metal materials

b&m Innovation

b&m-FORM S®

Direct screwing system with shortened forming zone suited for all ductile metal materials

b&m Innovation


Specialized direct screwing system for thin sheet metal applications

b&m Innovation


Direct screwing system with integrated sealing function for aluminum-steel hybrid applications

b&m Innovation